Router Công Nghiệp Teltonika RUT300

Teltonika RUT300 – Technical Specifications

ETHERNET

• WAN: 1 x WAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
• LAN: 4 x LAN ports (can be configured as secondary WAN ports), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

NETWORK

• Routing: Static routes, Dynamic routes (planned)
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned)
• VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
• Firewall: Port forwards, traffic rules, NAT rules, custom rules
• DHCP: Static and dynamic IP allocation, DHCP Relay
• QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNS (planned): Supported >25 service providers, others can be configured manually
• Network backup: Wired WAN options, each of which can be used as an automatic Failover
• Load balancing: Balance Internet traffic over multiple WAN connections
• SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

• Authetication: Pre-shared key, digital certificates, X.509 certificates
• Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN: Port and tag based VLAN separation
• WEB filter (planned): Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
• OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
• IPSec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
• GRE: GRE tunnel
• PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support (planned)
• Stunnel (planned): Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
• DMVPN (planned_: Method of building scalable IPsec VPNs
• SSTP (planned): SSTP client instance support
• ZeroTier (optional): ZeroTier VPN client support (not available in standard FW)
• WireGuard (optional): WireGuard VPN client and server support (not available in standard FW)

MONITORING AND MANAGEMENT

• WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
• FOTA: Firmware update from server, automatic notification
• SSH: SSH (v1, v2)
• TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTT (planned): MQTT Broker, MQTT publisher
• SNMP (planned): SNMP (v1, v2, v3), SNMP trap
• JSON-RPC: Management API over HTTP/HTTPS
• Modbus (planned): Modbus TCP status/control
• RMS: Teltonika Remote Management System (RMS)

FIRMWARE CONFIGURATION

• WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
• FOTA: Update FW/configuration from server
• RMS: Update FW/configuration for multiple devices at once
• Keep settings: Update FW without losing current configuration

INPUT/OUTPUT

• Input: 1 x Digital Input (Non-isolated, Logic low 0…+5V, Logic high +8…+40V)
• Output: 1 x Digital Output (open collector type, 30V@0.3A)
• Events: SMS, EMAIL, RMS

USB

• Data rate: USB 2.0
• Applications: Samba share, custom scripts
• External devices: Possibility to connect external HDD, flash drive, printer (planned)
• Storage formats: FAT, FAT32, NTFS

POWER

• Connector: 4 pin industrial DC power socket
• Input voltage range: 7 – 30 VDC, reverse polarity protection, voltage surge/transient protection
• PoE (passive): Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
• Power consumption: Idle: 1.3 W, Max: 3 W

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM

• Ethernet: 5 x RJ45 ports, 10/100 Mbps
• I/Os: 2 x Configurable digital Inputs/Outputs on 4 pin power connector
• Status LEDs: 5 x ETH status, 1 x Power
• Power: 1 x 4 pin DC connector
• USB: 1 x USB A port for external devices
• Reset: Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

• Casing material: Aluminium housing with DIN rail mounting option
• Dimensions (W x H x D): 100 x 30 x 85 mm
• Weight: 229 g
• Mounting options: DIN rail, flat surface placement

OPERATING ENVIRONMENT

• Operating temperature: -40 C to 75 C
• Operating humidity: 10 % to 90 % non-condensing